Oil Wellhead Equipment, Well Pressure Control Equipment Diverter
The diverter is used for controlling well pressure during oil and
gas drilling. It is connected with hydraulic control system, spool,
valve etc, to allow the controlled low pressure fluid to a safety
palace in a specified way, meanwhile assuring the safety of the
personnel and equipment. It can seal on varies of shapes and sizes
of drill tools, such as Kelly, drill pipe, tool joint ,drill
collar, casing etc ,meanwhile diverts the fluid from the well.
29 1/2''-500 psi Diverter
Structural Characters
* Diverter body is connected to head by jaws, which is easy to
disassemble with impact structure and good bearing capacity.
* The cylinder is in a single acting type, and the closing action
is realized by hydraulic forces while the opening action is
realized by the deadweight of piston or by elasticity of the
packing unit.
* All moving surfaces are processed by anti-corrosion measures in
order to protect the parts from corrosion by drilling fluid and
electrochemical corrosion to rubber parts.
* It improves the operational performance and extends the service
life of products.
* A wear plate is installed on the head, to avoid abrasion to the
bearing steel due to friction between the bearing steel of packing
unit and the head.
* The body is integral.
Specification
Bore Size: 749.3mm (29 1/2’’)
Rated Working Pressure: 3.5MPa (500psi)
Operating Chamber Rated Working Pressure ≤12MPa (1700psi)
Recommended Operating Chamber Working Pressure ≤10.5MPa (1500psi)
30''-1000 psi Diverter
Structural Characters
* It is composed of head, body, piston, spherical packing unit and
opening chamber head with a compact structure.
* All moving surfaces are processed by anti-corrosion measures in
order to protect the parts from corrosion by drilling fluid and
electrochemical corrosion to rubber parts.
* it improves the operational performance and extends the service
life of products.
Specification
Bore Size: 762mm (30’’)
Rated Working Pressure: 7MPa (1000psi)
Operating Chamber Rated Working Pressure ≤14MPa (2000psi)
Recommended Operating Chamber Working Pressure ≤10.5MPa (1500psi)
| 30’’-500 PSI Diverter |
| Bore | 762.2mm | Working Pressure | 3.5MPa |
| Close Oil | 245L | Open Oil | ------ |
| Control Pressure | 8.4-10.5MPa | Standard | API SPEC 16A |
| Overall Dimension | 2070*2070*1749 | Weight | 10973kg |
| Top Connection | Studded: MSS 30’’ CLASS300 R95 CRA |
| Bottom Connection | Flanged: MSS 30’’ CLASS300 R95 CRA |
| 30’’-500 PSI Spool |
| Bore | 762.2mm | Working Pressure | 3.5MPa |
| Weight | 1268kg | Standard | API SPEC 16A |
| Overall Dimension | 1330*1092*810 |
| Top Connection | Flanged: MSS 30’’ CLASS300 R95 CRA |
| Bottom Connection | Flanged: MSS 30’’ CLASS300 R95 CRA |
| Bypass Connection | Flanged: MSS 10’’ CLASS300 R53 CRA |
